PART 6 Data Communications
E
84
Sending Data
This section tells you how to operate the SF Unit to send data to another SF Unit,
or to a personal computer. There are a number of possible procedures you can
use, depending on the mode and how many data items you want to send.
About data transfer types...
There are a number of different ways you can transfer data.
• Mode Data Items
This method is used to send all data items stored in the Telephone Directory,
Memo Mode, To Do Mode, Calendar or Anniversary Mode from the SF Unit.
With the Schedule Keeper or Expense Mode, this procedure can be used to send
all the data stored in a specific period (from one date to another).
For the Calendar Mode, this procedure makes it possible to send all the highlight
data in a specific period (from one month to another).
• Month Data
This method lets you send the highlight data for a specific month in the Calendar
Mode.
• All Data Items
With this method, you can send all data items stored in the Telephone Directory,
Memo Mode, Anniversary Mode, Schedule Keeper, To Do Mode, Expense Mode
and the Calendar from the SF Unit.
Note
• If an alarm (Daily Alarm or Schedule Alarm) is reached while data is being
sent, the alarm does not sound until the data send operation is complete.
To Next Page
Loading...
Need help?
General
