85
E
To send all data items
1. While an initial screen is displayed, press FUNCTION once or twice to display
the function menu.
• Note that this operation sends all open memory area data or all secret
memory area data. Make sure you are in the memory area you want (open
or secret) before proceeding.
2. Press the applicable number key to select DATA COMM.
3. Press
1 to select SEND.
4. Press
2 to select ALL DATA.
5. Press
ENTER to start the send operation or ESC to abort the operation without
sending anything.
SENDING...
TO STOP PRESS ESC
• Data is sent in the sequence: Telephone Directory, Memo Mode, Anniversary
Mode, Schedule Keeper, Calendar, To Do Mode, Expense Mode.
• To abort the send operation at any time, press
ESC.
• If an error occurs during the send operation, the message “TRANSMIT
ERROR!” appears on the display. Press
ESC to clear the error message.
• When sending data to a personal computer, certain mode data may be
disregarded, depending upon the version of software you are using for SF
data handling on the personal computer.
6. After the send operation is complete, the display returns to the screen of
the mode you were in when you started this procedure.
Sending Data
To Next Page
Loading...
Need help?
General
