Casio TE-3000S - Master Re-Connection; Resetting the Busy Flag of the Check

163
Manager operation
TE-3000S/4000F/4500F Dealer's Manual
Master re-connection
This operation is used for re-connection the master with the satellite that activates this command.
Procedure
1. Issue open check reset report from this satellite.
2. Follow this step.
NOTE: If your system has two or more cutoff satellites, perform this procedure to all terminals.
Resetting the busy flag of the check
This operation is used for resetting the busy flag of the check in check tracking or clerk interrupt.
Procedure
6 9s 66 a
6 s
MGR
(Cancellation)
(Execution)
6 10s 66a
6 s
MGR
(Cancellation)
(Execution)(Check number)