12
Connecting to an Image Output Device
Connect the projector’s COMPUTER IN 1 or COMPUTER IN 2 terminal to the RGB terminal of a
computer as shown in the illustration below.
Important!
z Always turn off the projector and the computer before connecting them.
z Take care so the volume level of the computer is not set too high.
Connecting the Analog RGB Output of a Computer to
the Projector
Projector Computer
Bundled mini D-Sub cable
Audio cable (commercially available)
AUDIO IN 2 terminal
To monitor terminal
(analog RGB output terminal)
COMPUTER IN 1 terminal
To line output terminal
AUDIO IN 1 terminal
COMPUTER IN 2 terminal
To Next Page
Loading...
