21
Momentarily Blanking the Image and Muting the Audio
1.
Press the [BLANK] key.
z This temporarily blanks the image (projecting a black screen) and mutes the audio.
2.
To resume normal image and sound, press the [BLANK] key (or [ESC] key).
Note
You can specify projection of a black screen, a blue screen, a logo screen, or a custom logo
screen. For details, see “Blank Screen” (page 42) under “Screen Settings Main Menu”.
Freezing an Image
Pressing the [FREEZE] key freezes the projected image.
To freeze the projected image
1.
While an image is being projected from an input source, press the [FREEZE] key.
z This will capture the image that is on the screen at the moment you press [FREEZE] and stores
it in projector memory. That image remains projected on the screen.
2.
To restore projection of the image from an input source, press the [ESC] key.
To Next Page
Loading...
