moving money forward
Most operational problems can be avoided by regular care and preventative maintenance. Taking
regular care of the Cassida 8800R will significantly increase its lifetime.
To avoid problems, make sure there are no metal clips, staples, or rubber bands in the bills being
counted. Be sure to follow the proper procedure for loading the hopper, refer to section
2.2 Loading the Hopper. Also be sure to follow the proper procedure for adjusting the feed gap,
refer to section 6.2 Feed Gap Adjustment.
For best results, it is recommended to use an air duster and a soft bristle brush to remove any dust
or debris from the interior of the unit.
Dirty sensors can affect the Cassida 8800R’s performance and cause genuine bills to be rejected.
It is suggested that the user performs weekly maintenance on the unit to maintain top performance.
• To avoid malfunction caused by foreign objects, please clean your machine frequently
• Clean Hopper and Stacker sensors with the provided soft bristle brush or a dry cloth frequently
• Clean CIS line with provided soft bristle brush or a dry cloth frequently
• Clean sensors with provided soft bristle brush or a dry cloth frequently
• Rubber rollers may be cleaned with a slightly damp cloth. You may use a small amount of
isopropyl alcohol to dampen the cloth and clean the rollers. Wait until the rollers completely
dry before turning on you machine
6.1 Maintenance
MAINTENANCE AND TROUBLESHOOTING
ATTENTION: Always POWER OFF unit and disconnect
from power source before cleaning
6.
22
To Next Page
Loading...
Need help?
General
