OWNER’S MANUAL PAGE 28
Install the pedals
We strongly recommend that you use “clip less” pedals with cycling shoes.
Clip less is the industry term used to describe the type of pedals that your cycling shoes
connect to with small cleats on the underside of your shoes. The cleats that clip into the
pedals provided with every Catrike are Shimano SPD type. They're not only safer; they're
far more efficient, convenient and comfortable than using flat pedals.
The left pedal is reverse
threaded.
Make sure you don’t install the pedals incorrectly or
you might strip the crank threads. The pedals are
marked so you can tell which side they are installed
on.
TIP: Using anti-seize compound on the pedal threads will make future disassembly
much easier and will help prevent damage to the threads in the crank arms.
To Next Page
Loading...
