4 Installation
4.1 Software installation
Recommended computer properties are listed in Table 4.1:
Table 4.1. Recommended computer properties.
Intel i5 or higher, preferably latest generation multicore processor
8 GB or more (depending on the recording requirements)
SSD with sufficient capacity (depending on the recording requirements)
High quality display with wide viewing angle
Intel ethernet adapter (I350/I210 or similar); at least two connectors, if two
cameras are to be connected to the same computer
Efficient cooling (e.g. ventilation or conductive cooling) to prevent heating
If applicable, please uninstall old software version completely before installing new software
version!
Insert the CAVITAR Capture-H software CD into the CD drive and run the setup file (if the
setup doesn’t start automatically).
In some cases it may be necessary to disable firewall and/or virus software. As an example, in
Windows 10 the “Check apps and files” feature under Windows Security App & Browser
Control may need to be turned off. Please consult your IT support if needed.
The screenshots below show a typical installation procedure for Windows 10. The actual
appearance of the windows may vary.
Fig. 4.1. Select language and click “OK”.
To Next Page