To Next PageTo Next PageHow do I fix an incorrect liquid level display on my CBS V3000 Storage?
An incorrect reading on the liquid level display of your CBS Storage could be caused by: * An obstructed pressure port: Clear any blockage from the pressure port at the bottom of the vessel. * A loose sensor hose: Check the sensor hose connection. * The unit being out of calibration: Calibrate the unit.
Guidelines for safely handling liquid nitrogen, including proper protective clothing and container use.
Description of various display windows that appear in the Standard Operating Mode.
Description of various display windows that appear when the unit is in Program Mode.
Steps to verify the accuracy of the S Series liquid level display against a yardstick.
General| Interface | SATA 6Gb/s |
|---|---|
| Capacity | 3TB |
| Cache | 64MB |
| Dimensions | 147 mm x 101.6 mm x 26.1 mm |
| Form Factor | 3.5-inch |
