CCI.ControlCCI.Control – Glossary
101
Pos: 21 /CC-Isobus /Glossar @ 8\ mod_127496 1991767_6.doc @ 121689 @ 1
7 Glossary
Field mapping system, software for yield data processing and the creation of
application maps. (Farm Management Information System)
The technique with which the agricultural practice is performed, e.g. tillage with a
plough or grubber.
Section-specific setpoint map on which the quantity of product to be applied for
each section in a field is specified, e.g. in the case of fertilising. It is transferred
as a file to the terminal which processes it according to position on the field
during work.
Usually during the planning of application maps, in addition to the yield maps,
lots of other information is entered such as weather information, results of the
variety tests as well as the results of the location analysis such as soil tests, soil
maps or aerial views.
A file in ISO-XML format which contains the master data and the task data. It can
also contain application maps. The task data file is created in the FMIS, imported
to CCI.Control and exported for evaluation of the process data after task
processing.
The operating screen is comprised of the values and operating elements shown
on the screen. The touchscreen can be used to directly select the elements
shown.
Also known as a holding. All fields which are in possession of the customer
belong to a farm. A customer can have multiple farms.
A Boolean value is a value whereby it is only possible to choose between
true/false, on/off, yes/no etc.
Competence Center ISOBUS e.V.
Describes the type and the path of the data exchange (e.g. by a flash drive).
Electronic data sheet of the implement.
Yield maps show how much has been harvested at what point of the field. This
information provides the basis for a targeted cause study in low yielding zones
and provide a decision making basis for future cultivation measures.
If the farmer identifies, when evaluating the yield map, that within one application
the yields regularly differ considerably within one field, a section-specific
cultivation approach can make sense.
A system for yield mapping is comprised of
• Yield recording and
• Yield data processing.
A driver executes the planned task and operates the implement.
A field is the area to which a task can be allocated.
Global Positioning System.
GPS is a system for satellite-supported position determination.
To Next Page
Loading...
