Safety
2
1.3 Safety indications for the operator / user
Do not remove any safety mechanisms or signs.
Disconnect the power supply to the terminal during maintenance
work or when using a charging device on the battery of the
towed/production implement.
Never perform maintenance work or repairs when the device is
switched on.
Disconnect the power supply to the terminal beforehand when
welding on the tractor or an attached implement.
Only use a soft cloth moistened with clean water or a small
amount of glass cleaning agent to clean the terminal.
Use your fingertip to operate the buttons. Avoid using your finger
nails.
If, after having read these operating instructions there are sections
which you still do not understand, contact your dealer for clarifica-
tion before using the terminal.
Carefully read and observe all safety information in the operating
instructions and the safety labels on the terminal. Safety labels
must always be in a proper legible condition. Replace missing or
damaged labels. Ensure that new terminal parts are provided with
the current safety labels. Spare labels can be obtained from your
authorised dealer.
Learn how to use the terminal in accordance with regulations.
Keep the terminal and accessories in good condition.
To Next Page
