CC-ISOBUS CCI 50 - Hectare Counter and Documentation

CCI.TECU – Operation
33
4.5 Hectare counter and documentation
4.5.1 General
In general ISOBUS implements offer comprehensive options for the display and
documentation of process data. Often the display and documentation of the
underlying process data is however also worthwhile for implements that are not
operated via the ISOBUS.
Both the additional functions Hectare counter and Documentation of CCI.TECU
offer you this possibility.
Caution!
Only use Hectare counter and Documentation, if you are actually working with an
implement that is not being operated via the ISOBUS.
4.5.2 Hectare counter
In the Hectare counter screen there is information on
 Working width of the active implement
 Speed source for hectare counter,
 Working time,
 Distance travelled and
 Worked area.
You can reset the counters individually at any time. Thus you can use the hectare
counter to record the actual working time, the distance travelled and ground
coverage.
A total value and a value in the working position are given for the time, distance
and area respectively.
Total:
This shows the time, the distance covered and the
worked area since the last reset of the individual
counters.
In the working
position:
This shows the time, the distance covered and the
worked area in working position since the last reset of
the individual counters.