CCL 216B - CLI Receiving Mode (DTMF; FSK); CLI Transmitting Mode (FSK); Conference; Conference with 1 Junction & 1 Ext

Note- If CLI digit addition is enable then if extensio n is of 2 digits then 2 dummy zero s are added before extensio n numb er
and if the extensio n numb e r is of 3 digits then a zero is added before the extensio n
numb er. Default: Disabled
. CLI Receiving Mode (DTMF / FSK ) .
The system senses CLI on Junctio n lines in DTMF mode or FSK
mode. Proced ure:
Dial #*0000 + 181 J 0 # for FSK mode
Dial #*0000 + 181 J 1 # for DTMF
mode where J= Junctio n Numb e r 1 or 2
Default: FSK mode
. CLI Transmitting Mode (FSK) .
The PBX generates CLI on Extensio ns in DTMF mode in default.
Conference with 1 Junction & 1 Ext .
An extensio n user can establish a conference with an extensio n and a Junctio n
line. Process : During conversatio n with a Junctio n line, Hook-Flash to hold the
line.
Then dial * Ext No.
. Conference with 2 Junctions .
An extensio n user can establish a conference with 2 Junctio n Lines:
Process: During conversatio n with a Junctio n line - Hook-Flash - ## (To park the Call) – 0 – Tel No (who is
to
be included in conferencing ) – Hook Flash - # * - Now all 3 party can talk to each
other. When Ext keeps the Handset down, the conference ends.
Day / Night Mode .
The PBX can be configured in 2 sets of program ming. One for the day mode and one for the night mode.
To chang e the system to Day Mode,
Dial # 20
To chang e the system to Night Mode,
Dial # 21
Default: Day Mode.
Denied Table – A .
. Numb ers to be disallowed to extensio ns whose L = 4, are to be defined in this table. For value of L refer “Junc tio n Dialing
Controls ”
This table has 16 Locatio ns.
Proced ure: Dial #* 0000 + 41 QQ ABCD#
Where QQ= 01 to 16 (16 Locatio ns of the Table)
ABCD= The starting 4 digits of the Tel numb ers to be denied to
extensio n. For less than 4 digits, dial # at the end of digits.
To clear this Table: Dial #* 0000 + 41 #
To clear a particular location of this table: Dial #* 0000 + 41 QQ #
. Denied Table – B .
Numb e rs to be disallowed to extensio ns whose L = 5, are to be defined in this table. For value of L refer “Juncti o n Dialing
Controls ”.
This table has 16 Locatio ns.
Proced ure: Dial #* 0000 + 42 QQ ABCD#
Where QQ= 01 to 16 (16 Locatio ns of the Table)
ABCD= The starting 4 digits of the Tel numb ers to be denied to extensio n.
For less than 4 digits, dial # at the end of digits.
To clear this Table: Dial #* 0000 + 42 #
To clear a particular location of this table: Dial #* 0000 + 42 QQ #
. Do Not Disturb (DND) .
In DND mode, no one can call the DND extensio n
PROCEDU RE: Dial # 83
To cancel DND, simply lift Handset.
. Door Phone .