How to fix a dark image on CCTV Security Camera?
To fix a dark image on the screen, adjust the contrast control of the monitor. Additionally, if there is an intermediate device, correctly set the 75?/Hi-z.
What to do if CCTV Security Camera is hot and not working properly?
If the camera is not working properly and its surface is hot, check that it is correctly connected to an appropriate regulated power source.
Why is the CCTV Security Camera image on the screen dim?
A dim image on your CCTV Security Camera can be due to several reasons. The camera lens or the lens glass might be dirty, in which case you should clean it with a soft, clean cloth. You may also need to adjust the monitor controls or the lens focus. Finally, if the camera is facing a very strong light, try changing its position.
What to do if CCTV Security Camera image on the screen flickers?
If the image on the screen flickers, it might be because the camera is facing direct sunlight or fluorescent lighting. To resolve this, make sure that the camera isn’t facing direct sunlight or fluorescent lighting. If necessary, change the camera position.
Why is motion detection not activated on my CCTV Security Camera?
If motion detection is not activating, ensure that 'MOTION DET' has been set to 'ON' in the menu and that 'MD AREA' has been properly defined.
How to correct the color of the picture on CCTV Security Camera?
To correct the color of the picture, check the settings in the WHITE BALANCE menu.
Why the SENS-UP does not work on CCTV Security Camera?
If the SENS-UP function isn't working, verify that the AGC setting in the EXPOSURE menu isn’t set to OFF. Also, check the EXPOSURE menu and make sure SHUTTER is set to------.
What to do if nothing appears on the CCTV Security Camera screen?
Check the power cable, power supply output and video connection between the camera and monitor.
Details DNR, ACCE, HLC, and Illumination for enhanced image quality and low light performance.
Covers temperature, humidity, lighting, physical shocks, and liquid exposure.
Includes lens care, avoiding direct light, and radioactivity exposure.
Install by qualified personnel, do not disassemble, use approved power supply.
Avoid abrasive detergents, direct sun, high humidity, and heat/cooling devices.
Configure Lens, Exposure, White Balance, Day/Night, and Noise Reduction settings.
Access special features like Camera Title, D-Effect, Motion, Privacy, Defect.
Adjust sharpness and monitor functions (LCD, CRT) including Gamma, Gain, and Level.
Resets all camera settings to their factory default values.
General| Video Output | HD-SDI |
|---|---|
| Sensor Type | CMOS |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to +50°C |
| HD-SDI Standard | SMPTE 292M |
| Resolution | 1920x1080 |
| Frame Rate | 30fps |
| Lens Type | Varifocal |
| Lens Mount | CS Mount |
| IR Range | 30m |
| Minimum Illumination | 0.01 Lux |
| Day/Night Function | Auto ICR |
To Next Page