CDA CDI6121 User Manual

10
Cancelling a programme
It is possible to cancel the programme once the programme has
started.
• First open the door slightly to reduce the risk of water spillage.
• Press and hold the ‘Programme selection’ button for approximately
three seconds and a ‘1’ shows on the display.
• Then close the door. The dishwasher will drain for approximately
thirty seconds. Once this is complete, the dishwasher will beep five
times and the display will show ‘00’.
Switching the dishwasher o
• Once the dishwasher beeps five times, the dishwasher can be
switched o by pressing the ‘On/O’ button.
• Then, turn o the water tap and remove the plug from the power
socket.
Please note: The dishwasher will automatically continue on the
programme it has started if operation is interrupted.

CDA CDI6121 Specifications

General

Door color	Black
Water fill	Cold
Cord length	1.65 m
Control type	Buttons
Display type	LED
Product size	Full size (60 cm)
Certification	WEEE
Built-in display	Yes
Inlet hose length	1.47 m
Number of baskets	2 basket(s)
Custom panel-ready	No
Outlet hose length	2 m
Appliance placement	Fully built-in
Cutlery compartment type	Basket
Cycle time	221 min
Noise level	49 dB
Drying system	Active ventilation
Delay start (max)	19 h
Dishwashing programs	Eco, Hygiene, Pre-wash, Quick
Number of place settings	13 place settings
Number of washing programs	5
Connected load	1900 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.5 W
Power consumption (left-on)	1 W
Water consumption per cycle	9 L
Energy consumption per cycle	0.937 kWh
Package depth	661 mm
Package width	644 mm
Package height	851 mm
Package weight	31300 g
Country of origin	Turkey
Customs product code (TARIC)	8422110000

Weight and Dimensions

Depth	550 mm
Width	598 mm
Height	820 mm
Weight	29700 g