23
Error Codes
The programme display also serves as a diagnostic display to help in
the event of a problem with the appliance. Potential error codes, their
causes and potential solutions are below:
Error code Possible error Advice
FF Water inlet system failure
Make sure the water inlet tap is open and water is flowing
Seperate the inlet hose from the tap and clean the filter
fo the hose
Contact CDA customer care if the error continues
F5 Pressure system failure Contact CDA customer care
F3 Continuous water input Close the tap and contact CDA customer care
F2 Inability to discharge water
Water discharge hose and filters may be clogged -
Remove foreign bodies such as food residue or glass
shards
Cancel the programme
If the error continues contact CDA
customer care
F8 Heater error Contact CDA customer care
F1 Overflow
Unplug the machine and close the tap
Contact CDA customer care
FE Faulty electronic card Contact CDA customer care
F7 Overheating Contact CDA customer care
F9 Divisor position error Contact CDA customer care
F6 Faulty heater sensor Contact CDA customer care
HI High voltage failure Contact CDA customer care
LO Low voltage failure Contact CDA customer care
To Next Page
Loading...
