CDA CDI6121 User Manual

7
Before First Use
•
Set the water softener level as required by the water hardness in the
area (see pages 13-14).
• Add 1kg of salt into the salt compartment and then fill with water to the
top of the salt compartment.
• Remove all the packaging materials from the interior of the dishwasher.
• Fill the rinse aid compartment.
• Run a hot programme without any dishes in the dishwasher.
Control Panel
On/O button
To switch the power to the dishwasher on or o, press the ‘On/O’
button (2). When you switch on the dishwasher, two dashes will
appear on the programme display (1).
Programme selection button
To select an alternative programme, press the ‘Programme selection’
button (3) several times, until the programme display (1) shows the
desired programme. The dishwasher will store, in its memory, the last
programme used.
Programme Delay Timer Half Load
Rinse Aid
SaltHalf Load
On/Off
CDI6121
1 2 3 4 5
6
7
8
65 C50 C 50 65 C 40 C
1
2
3 4 5

CDA CDI6121 Specifications

General

Door color	Black
Water fill	Cold
Cord length	1.65 m
Control type	Buttons
Display type	LED
Product size	Full size (60 cm)
Certification	WEEE
Built-in display	Yes
Inlet hose length	1.47 m
Number of baskets	2 basket(s)
Custom panel-ready	No
Outlet hose length	2 m
Appliance placement	Fully built-in
Cutlery compartment type	Basket
Cycle time	221 min
Noise level	49 dB
Drying system	Active ventilation
Delay start (max)	19 h
Dishwashing programs	Eco, Hygiene, Pre-wash, Quick
Number of place settings	13 place settings
Number of washing programs	5
Connected load	1900 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.5 W
Power consumption (left-on)	1 W
Water consumption per cycle	9 L
Energy consumption per cycle	0.937 kWh
Package depth	661 mm
Package width	644 mm
Package height	851 mm
Package weight	31300 g
Country of origin	Turkey
Customs product code (TARIC)	8422110000

Weight and Dimensions

Depth	550 mm
Width	598 mm
Height	820 mm
Weight	29700 g