EasyManuals Logo

CDA hn9610 User Manual

CDA hn9610
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
Level 2
Touch the “Booster” key twice so the booster control light
ashes.
Then touch either the “+” or “-” key for the zone you wish to boost.
The display for that zone will show “ ” alternating with “ .
To cancel the booster at any time, touch the “-” key for that zone.
Note: The hob is fitted with a power management system to limit the
total power used. When using the booster on one or more zones this
function may limit the power being used by other zones.
Auto-heat
Every zone is equipped with an auto-heat function, which reduces
the warming up time for the zone. To turn on the auto-heat function:
• Set the power level for that zone to “9”.
Then touch the “+” key for that zone again so its display alternates
between “9” and “A.
Within ve seconds, select the power level required. The display
will alternate between the set power level and “A” for a preset
period of time. When auto-heating has nished the power will
reduce to the level set.
If no nal power level is set, the auto-heat is switched o and the
zone will remain on power level “9”.
Pause
The hob is equipped with a pause function which pauses cooking
temporarily without switching the power o completely.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CDA hn9610 and is the answer not in the manual?

CDA hn9610 Specifications

General IconGeneral
BrandCDA
Modelhn9610
CategoryHob
LanguageEnglish

Related product manuals