CDA wc431 User Manual

13
hardness is preset to level 3.
1. Press and hold down the programme selection button
2. Press the Power button to switch on the dishwasher
3. Keep the programme selection button pressed until “8”
shows on the display and then disappears.
4. After the 8 disappears the machine displays the last water
hardness setting entered.
5. To adjust the level, press the programme selection button
(3) until the required level is shown on the display, as listed
in the Table of Water Hardness below.
6. To store the selected water hardness level, press the
power button.
Water Hardness Level
British Hardness dE
Display Shows
1
0 – 6
L1
2
7 – 14
L2
3
15 – 21
L3
4
22 – 28
L4
5
29 – 39
L5
6
40 - 63
L6

CDA wc431 Specifications

General

Door color	Not applicable
Built-in display	No
Appliance placement	Fully built-in
Control panel color	Black, Stainless steel
Noise level	52 dB
Delay start (max)	9 h
Delayed start timer	Yes
Dishwashing programs	Eco, Intensive, Pre-wash, Quick
Number of place settings	10 place settings
Number of washing programs	6
Drying class	A
Annual energy consumption	237 kWh
Water consumption per cycle	13 L
Energy consumption per cycle	0.83 kWh

Weight and Dimensions

Depth	570 mm
Width	448 mm
Height	870 mm