EasyManua.ls Logo

CDA wc431

CDA wc431
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
the dishwasher can be very hot when the programme is
running.
When the dishwasher is not in use, we recommend that
you turn off the water supply at the supply tap and
disconnect the main supply.
If you are leaving the dishwasher for an extended period
you should leave the door slightly open to prevent the
formation of unpleasant smells.
The plastic housing on the water inlet pipe contains an
electrically operated valve. The wires that connect to this
valve are inside the inlet hose. Do not cut through the inlet
hose, and do not put the plastic housing in water.
Children could get locked inside the appliance. Therefore
when disposing of an old appliance, cut off the plug and
set aside, and damage the door lock so that the door can
no longer be closed.
R
ec
ommendations
To reduce energy and water consumption, remove all dirt
residues from the dishes prior to loading the dishwasher.
Only run the dishwasher when fully loaded.
Place hollow items (bowls, glasses and pans) face down in
the basket.
Do not put dishes or cutlery with tobacco ash, wax,
lubricating grease or paint residues in the dishwasher.
Before First Use
Set the water softener level as required by the water
hardness in the area.
Add 1kg of salt into the salt compartment and then fill with
water to the top of the salt compartment.
Remove all the packaging materials from the interior of the
dishwasher.
Fill the rinse aid compartment.

Related product manuals