CDA wc431

21
Failure Codes and Troubleshooting
The programme indicators also serve as a diagnostic display to
help in the event of a problem with the appliance.
Error Code
Error Description
Advice
F1
Alarm is active against
water flow
Turn off dishwasher and disconnect water
supply
Contact CDA Customer Care
F2
Waste water in the
machine cannot be
discharged
Drain hose is blocked
The filters in the machine may be blocked
Restart the dishwasher and cancel the
programme
If the error continues contact CDA Customer
Care
F3
Continual fill error
Contact CDA Customer Care
F5
Inadequate water
supply
Make sure the water tap is fully open
Close the water tap, separate the water inlet
hose from the tap and clean the filter
Restart the dishwasher
If the error continues contact CDA Customer
Care
F6
Faulty heater sensor
Contact CDA Customer Care
F7
Overheating error
(temperature in the
machine is too high
Contact CDA Customer Care
F8
Heater error
Contact CDA Customer Care
F9
Spray diverter position
error
Contact CDA Customer Care
FE
Faulty electronic card
Contact CDA Customer Care