CDA wc431 User Manual

6
• Run a hot programme without any dishes in the
dishwasher.
Control Panel
1 2 3 4 5 6 7
2 3 4 5 6 7
Power Button (1)
To switch the dishwasher on or off, press the power button (1).
When you switch on the dishwasher, the end of programme light
will illuminate, and two dashes will appear on the display.
Programme Display (2)
The programme display shows the selected programme and the
remaining time to run. If there is a fault on the dishwasher, the fault
code will show on the display.
Programme Selection Button (3)
To select a programme, press the programme selection button (3).
The dishwasher will store in its memory the last programme used.

CDA wc431 Specifications

General

Door color	Not applicable
Built-in display	No
Appliance placement	Fully built-in
Control panel color	Black, Stainless steel
Noise level	52 dB
Delay start (max)	9 h
Delayed start timer	Yes
Dishwashing programs	Eco, Intensive, Pre-wash, Quick
Number of place settings	10 place settings
Number of washing programs	6
Drying class	A
Annual energy consumption	237 kWh
Water consumption per cycle	13 L
Energy consumption per cycle	0.83 kWh

Weight and Dimensions

Depth	570 mm
Width	448 mm
Height	870 mm