CDI CD42-T1A - CD42-T1 Battery Installation

22 Hz ELECTROMAGNETIC TRANSMITTER USER GUIDE
Page 16 of 52
GETTING STARTED ͳ CD42ͳT1
Installing BaƩ eries
Load T1 Ba ery Carousel with six (6) AA-Cell
alkaline ba eries. Posi ve terminal (+)
is always opposite tension spring.
Replace carousel as shown.
Inspect cap and O-ring before replacing.
Ensure O-ring is serviceable. A bri le and/or deformed O-ring may not
properly seal. Lubricate O-ring with a light coa ng of petroleum jelly
if dry.
Ensure O-ring groove and screws are clean
and free of ruptures, dents,
or other damage.
NOTE: it is good prac ce to
always install new ba eries
prior to deployment.
(6) AA-Cell
al
(
+
)
.
I
t
an
d
O
ri
ng
b
ef
or
e
re
placing
w
s are c
l
ean