22 Hz ELECTROMAGNETIC TRANSMITTER USER GUIDE
Page 50 of 52
WARRANTY, CARE, AND SERVICING
CARE, MAINTENANCE, AND SERVICING
Equipment designed by CDI is protected against the environment in
which it is intended to operate. Much of the equipment is designed
for prolonged use in the fi eld without any special maintenance other
than rou ne ba ery replacements. It is the Purchaser’s responsibility
to insure that proper precau ons are taken during installa on and
opera on so that weather seals are in place, rou ne maintenance
occurs, etc. Failure to perform these opera ons nullifi es this warranty.
CDI equipment should only be operated by qualifi ed personnel who are
familiar with any and all manuals and procedures for said equipment’s
opera on.
Service and Repairs
Cost for repairs not covered by the warranty or carried out a er the
warranty period has expired will be charged at the current hourly or set
service rate, plus the cost of materials, upon approval by Purchaser.
Equipment for repair must be sent at the Purchaser’s expense and be
accompanied by the Purchaser’s wri en order describing the defect and
authorizing CDI to invoice the Purchaser for labor, materials and return
delivery cost.
No service or repair will be undertaken un l an approved wri en order
is received from the Purchaser.
Opera ng equipment while in a damaged condi on nullifi es this
warranty.
To Next Page
Loading...