22 Hz ELECTROMAGNETIC TRANSMITTER USER GUIDE
Page 31 of 52
GETTING STARTED ͳ CD42ͳT4/T4A/T4VHP
CD42-T4/T4A/T4AVHP
Confi guring T4/T4A/T4VHP TransmiƩ er
All T4 model transmi ers are programmed at the factory. Due to
their construc on, T4 transmi er behavior cannot be modifi ed a er
manufacture. User control is limited to ON/OFF by means of removing/
replacing end cap.
Installing BaƩ eries
Remove cap.
WARNING
Always use cau on when opening any CDI transmi er that has been in a
pressurized environment. It is possible for pressurized liquid or gas to leak
into a transmi er and remain there even aŌ er the transmiƩ er has been
removed from the pipeline. Always point the transmi er away from yourself
or others when opening the antenna or ba ery caps.
To Next Page
Loading...