CDI CD42-T1A - Page 27

22 Hz ELECTROMAGNETIC TRANSMITTER USER GUIDE
Page 27 of 52
GETTING STARTED ͳ CD42ͳT1A/T1AHP/T1AVHP
Installing BaƩ eries (SWX)
Ba ery loading procedure is the same as with The T1A, T1AHP, and
T1AVHP carousels. The only diff erence is that the SWX carousel is affi xed
to the pressure switch
and not detachable.
Installing SWX to TransmiƩ er
Inspect threads and O-ring before installing.
Ensure O-ring is serviceable. A bri le and/or deformed O-ring may not
properly seal. Lubricate O-ring with a light coa ng of petroleum jelly
if dry.
Ensure threads are clean and free of ruptures, dents, and other damage.
n
sure threads are clean a
nd
f
re
e
of
r
up
tu
re
s,
d
en
y
diff
erence
is
that
the
SWX
carousel
is
affi
xed
Ʃer
NOTE: The SWX merely ac vates a transmi er at a factory-
programmed pipeline pressure. Transmi er behavior (delay-ON
 mes, custom pulse pa erns, constant-ON transmission, and other
features) remain unaff ected by SWX installa on.