cecotec CONGA 2290 - Safety instructions

CONGA 6090 | 29
ENGLESK
Safety instructions
Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
- This product must be used in accordance with the directions
in this instruction manual. Cecotec cannot be held liable or
responsible for any damages or injuries caused by improper
use.
- Make sure that the mains voltage matches the voltage stated
on the rating label of the appliance and that the wall outlet is
grounded.
- This product can only be disassembled by qualied personnel.
- Do not touch wires, power supplies or power adapters with
wet hands.
- Keep the robot away from clothing, curtains and any other
similar materials.
- Do not expose the robot to direct sun, open re or wet
environments.
- Do not sit or place heavy or sharp objects on top of the
appliance.
- This product is designed for indoor use only, do not use
outdoors.
- Before operating the robot, remove all objects and wires that
could aect its operating.
- Always place the device on a at and stable surface. Avoid
placing it in unstable places where there is risk of falling,
such as tables or chairs.
- Turn o the power switch, located on the bottom part of the
robot, when it is not going to be used for a long time.
- Before operating it, make sure all the robot’s and charging
base’s connections are in good conditions.
- Avoid operating the product under extremely high or low
temperatures.
- Remove the battery from the product’s inside before scrapping
the robot.