cecotec CONGA 2290 - Parts and Components; Component Identification; Operational Indicators and Buttons

CONGA 6090 | 31
ENGLESK
1. PARTS AND COMPONENTS
Fig. 1
1. Wi-Fi indicator
2. Power/operation button
3. Back home button
Back home button
The robot will automatically go to the charging base when this button is
pressed on the robot or on the remote control.
Indicator light
- Charging: Oscillating orange light
- Fully charged: Steady blue light
- Standby mode: Steady blue light
- Error: Steady/oscillating red light
- Low battery: Steady orange light
- Cleaning: Steady blue light
- Sleep mode: Light o
Power/operation button
- Hold down this button for a few seconds to turn the robot on or o.
- Press it to start cleaning too.
Fig. 2
1. Anti-collision sensor
Fig. 3
1. Free-fall sensors
2. Driving wheels
3. Power switch
4. Charging terminals
5. Omnidirectional wheels
6. Side brushes
7. Battery
8. Dust tank
9. Main brush
Fig. 4
Charging base