• DIAMOND SAW BLADES
for wet and dry cutting in concrete, reinforced concrete, asphalt, natural stone;
saw blade diameter from 110 to 2200 mm
• DIAMOND DRILL BITS
for wet and dry drilling in concrete, reinforced concrete, asphalt, natural stone;
drill bit diameter from 12 to 1200 mm
• DIAMOND TOOLS
grinding discs for hand and oor grinders, diamond saw wires,
chamfering discs, diamond saw chains, diamond segments
• JOINT CUTTERS
with petrol, diesel or electric motor, with or without automatic feed;
cutting depths from 120 to 900 mm
• CORE DRILL MACHINES
hand or drill rig machines with electric or hydraulic drilling motor;
drill diameter from 12 to 1250 mm
• WALL SAWS AND WIRE SAWS
electric, hydraulic and electro-hydraulic wall saws with a cutting depth
up to 730 mm; wire saw machines, circular saw
• TABLE SAWS
to cut tiles, general construction material or large-format stones;
cutting depth from 25 to 450 mm
• SPECIAL MACHINERY
reinforced concrete breakers, oor grinding machines, surface milling machine,
crack mills, brush machines, chain saws, hand-held saws, slurry separators
CEDIMA® Diamantwerkzeug- und
Maschinenbaugesellschaft mbH
Lärchenweg 3 • 29227 Celle/Germany
Tel. +49 (0) 5141-88540 • Fax +49 (0) 5141-8 64 27
Internet: www.cedima.com • E-mail: info@cedima.com
To Previous Page
Loading...
