Cedima CF-2116 D - Warnings and Symbols; Principle of Proper Use; Organisational Measures

ENGLISH
11
General safety instructions
• CEDIMA
®
• Technical Documentation • All rights reserved as per ISO 16016 • Subject to modications due to progressive development •
ATTENTION
Please observe all operating manuals
belonging to the machine!
Before placing the joint cutter into operation read and
observe by all means all the operating manuals (joint
cutter, drive motor, ...)!
3.1 Warnings and symbols
The following signs and headings are used in this
manual for comments of special Importance:
NOTE/INFO
is used for comments on economic use.
The text following the INFO symbol provides
important information, and it is separated from
other text.
ATTENTION!
is used for particular comments or
statements concerning accident
prevention (i.e. when something is compulsory or
prohibited).
The text following the ATTENTION symbol provides
instructions which must be precisely observed to avoid
damage to the machine or material and injuries to the
user or a third party.
DANGER!
is used for crucial statements concerning
accident prevention (i.e. when something
is compulsory or prohibited) in order to avoid
injuries to the user or third party as well as
considerable damage to the machine or material.
The text following the WARNING or CAUTION
symbol warns the reader that the user or a third
party is likely to be injured if the instruction given
is not observed or if he does not proceed as
described.
Important statements are printed in italics.
Statements concerning safety are printed bold and
in italics.
3.2. Principle of proper use
• The joint cutter CF-2116 D, hereinafter called the
machine, has been designed exclusively for use as
a fully mobile apparatus suitable for cutting asphalt,
concrete and other abrasive building materials used
in roads, industrial oors and suspended oor slabs
as well as run ways. The machine is not intended for
any other use; in particular the use of the machine
with cutting tools other than diamond saw blades
is prohibited. The manufacturer/distributor of the
machine can not be held liable for any damages
or injuries which result from improper use of the
machine; any and all risk shall be borne by the user!
• Proper use also includes the observance of this
operational manual and the compliance with the
inspection and maintenance conditions!
• The machine has been built according to the state-
of-the-art technology and the recognised safety
rules. However, dangers to life and limb of the user
or others, as well as damage to the machine or other
property can result!
• The machine may only be used in the proper manner
and only if it is in good working order, with an
awareness of safety and danger, in compliance with
this operational manual and the applicable national
regulations. In particular, faults that may impair safety
must be rectied immediately!
3.3 Organisational measures
• This operational manual must always be kept at the
hand at the machine operating site and must be
accessible to operating personnel at all times!
• In addition to the operating manual, generally
applicable legal and other binding rules
and regulations for accident prevention and
environmental protection must also be observed!
Such duties can, for example, also concern the
handling of dangerous substances, the provision/
wearing of safety equipment or road trafc
regulations!
• Additionally this operating manual with instructions,
including supervisory and reporting duties for taking
special plant situations should be observed, e.g. with
regard to work organisation, working procedures,
personnel used, ect.
3.0 General/basic safety instructions for joint cutters