Oxygen saturation
CUT-OFF range (SpO
2
)
Number of cycles
CREATING & MODIFIYING PROGRAMS
Creating a new
program
To create a new training program:
Select the “New Program” button in the “Program Selection” menu and you
will be taken to the Control Centre. The following settings can be changed
with the “-” and “+” keys:
The safety CUT-OFF value is a limit value of
the O2 saturation (SpO2) in the blood. If this
value is not reached for a defi ned period, the
system automatically switches to an O2 con-
centration of 34%.
In conjunction with the phase length of hy-
poxia/hyperoxia, the total program length
results from the number of cycles.
Length of the hypoxia phase
The length of the phase with a “low” O2 con-
centration in the air.
Length of the hyperoxia phase
The length of the phase with an O2 concentra-
tion in the inhaled air of 34%.
Set O2 value
O2 concentration in the inhaled air during
hypoxia phases.
Program run modes
Buttons for the program run are multifunc-
tional (see function keys).
Control Centre
You can manually change the O2 concentration in the inhaled air during hy-
poxia phases and the SpO2 CUT-OFF during the “live” program.
Program name
The name of your training program can be
freely selected and saved.
CELLAIR
®
GECKO DOCUMENTATION
16SITE
04/2018
To Next Page
Loading...