SYSTEM REQUIREMENTS
Direct mode or WLAN router (home network)
Prerequisites
Hardware
For automatic software updates, you must connect your terminal device to
the Google Play Store or iTunes App Store.
If you don’t already have a Google account (e.g. Gmail), you’ll need to cre-
ate one fi rst. You can do this either on the Google website (fi rst click on
“Sign in” and then on “Register”) or directly on your Android smartphone or
tablet. When you use the tablet/smartphone for the fi rst time, the Confi gu-
ration Wizard should start automatically. Otherwise, proceed as follows:
1. Open the app drawer (the overview of all installed apps) on your
tablet/smartphone and select “Settings”
2. Select the entry “Accounts & Synchronisation” and then “Add account”
at the bottom of the screen.
Software
Create a new PlayStore account (Google Account):
The CellAir® Gecko app can communicate with the CellAir® Gecko hypoxi-
cator in 2 ways. In direct mode, the CellAir® Gecko hypoxicator serves as
an access point (base station) and communicates directly with your end
device (tablet/smartphone). However, the preferred connection is integra-
tion in your WLAN network. Please have your WLAN access password
ready for integration in your WLAN network. This is usually located on the
housing of your WLAN router.
Android and iOS operating systems
Android 4.0 or higher must be installed on your Android tablet or smart-
phone.
iOS 7.0 or higher must be installed on your iOS tablet or smartphone.
To Next Page
Loading...