Cellink BIO X - Unpacking, Lifting, and Carrying; Electrical Information; Protective Equipment

7
BIO X uses UV light for sterilizaon and curing. Never look directly at UV light. Never
expose skin to UV light. Eye or skin exposure can result in serious personal injury.
BIO X has heated surfaces that can reach temperatures up to 250 degrees Celsius.
Never touch heated surfaces when using the heang funcon. Always let printheads
and print bed cool aer using the heang funcon.
Always ensure that equipment is correctly mounted before use. Improperly mounted
print beds, printheads, cartridges, cables, liquid spouts and air spouts can be dangerous. If
any equipment appears damaged, turn o the machine, unplug all external connecons
and contact CELLINK before further use.
1.2 Unpacking, liing and carrying
BIO X is heavy. Always use a minimum of two people to unpack and move the machine.
Read how to safely unpack and setup BIO X in Chapter 3.
1.4 Protecve equipment
1.3 Electrical informaon
Always wear gloves and eye protecon during bioprinng, UV curing and sterilizaon.
Always wear gloves and eye protecon while handling hazardous materials, including
materials that are toxic, corrosive and carcinogenic.
Read the material safety data sheets, packing labels and the manufacturer or distributor’s
catalog before using the BIO X.
Always connect BIO X to a grounded socket and use the voltage described in the
specicaons. Improper electrical handling can cause equipment damage and personal
injury.
Never tamper with any safety interlocks. Tampering risks equipment damage and
personal injury.