Cellink BIO X - ESD Protection

9
1.7 Electrostac discharge (ESD) protecon protecon
1.7.1 Introducon
The BIO X print chamber is ESD-sensive. Use the following procedures to ensure that no damage
is caused to the BIO X or its accessories.
1.7.2 Procedures
Review the procedures to follow when using the BIO X print chamber and handling printheads.
Always discharge yourself before touching any ESD-sensive parts.
1.7.2.1 Discharging yourself
To discharge yourself, touch a grounded metal surface. Discharge yourself before touching printheads
or installing them in the BIO X. Examples of grounded metal surfaces include:
• Any metal surface in a laminar ow hood.
• Any metal sink.
• The frame of the BIO X when connected to a grounded power outlet, as well as any exposed
screws, including the screws on the le-side door hinges.
1.7.2.2 Using proper clothing
Avoid charging yourself to ensure ESD protecon. Wear clothes made out of coon when appropriate.