Centurion SDO4 SMART - Required Tools and Equipment

page 12 www.centsys.com
4. Required Tools and Equipment
3.1. Fasteners List and Spares
FIGURE 3. REQUIRED TOOLS AND EQUIPMENT
Description QTY
ST5.5 x 50 Self-tapping Coach Screws
4
ST8 x 60 Self-tapping Screws
3
ST6.3 x 25 Self-tapping Screws
- Hex Flange Head
3
M6 x 8 Black Cross Pan Head Screws
2
M8 x 20 Hexagon Head Bolts
6
M6 x 12 Black Wizzlock Bolts
4
Description QTY
M8 Wizzlock Nuts
8
Ø8 x 71 Clevice Pin
1
Ø8 x 18 Black Clevice Pin
1
Ø2 Hairpin Clips
2
12 x 60mm Fischer Plugs
3
M8 x 25(Pitch 1.25) Black Gutter Bolts
2
TABLE 3
Drill bits
11mm & 6mm
masonry;
6mm drill bit
2 Spirit levels
Marking
pen/chalk/pencil
Extension cord
Measuring
tape
Electric drill
Screwdrivers
3.5mm at;
No.2 Phillips
Tin Snips
10mm, 12mm,
and 13mm
Sockets,
Socket wrench,
and extension
10mm Coach
screws
(13mm hex head)
and plugs
REQUIRED TOOLS AND EQUIPMENTSECTION 4