Centurion VECTOR2 - 1. VECTOR2 identification

page 4
Identification
of
parts
1. VECTOR2 identification
Refer to the drawings below, for how to identify your VECTOR2 operator
and its parts.
1. 12V 7.2Ah
battery
2. Interface board
with an anti-
tamper switch
3. Controller with
onboard receiver
4. Origin marker
bracket and cap
screw
5. Gate bracket pin
6. Gate bracket
7. VECTOR2 gate
operator
(complete
assembly)
8. Camlock
9. Spare fuse holder
for both ATO and
glass fuses
10. 2A 12V charger
11. Built-in isolator to
conform with
legal
requirements
12. Built-in, easily
accessible earth
points
13. Controller box
14. Standard wall
bracket
(complete
assembly)