3-293-29
MAT. HANDLING
The Mat. The Handling function is used to view/modify the hydraulic system parameters.
1 - MIN SPEED UP
2 - MAX SPEED UP
3 - TILT SPEED FINE
4 - SHIFT SPEED FINE
5 - IV WAY SPEED FINE
DESCRIPTION MIN. MAX STEP UNIT
Determines the minimum lifting speed 14 32 2 Hz
Minimum setting = minimum speed
Maximum value = maximum speed
DESCRIPTION MIN. MAX STEP UNIT
Determines the maximum lifting speed 100 145 5 Hz
Minimum setting = minimum speed
Maximum value = maximum speed
DESCRIPTION MIN. MAX STEP UNIT
Determines the maximum tilting speed 20 56 2 Hz
Minimum setting = minimum speed
Maximum value = maximum speed
DESCRIPTION MIN. MAX STEP UNIT
Determines the maximum sideshift speed 20 58 2 Hz
Minimum setting = minimum speed
Maximum value = maximum speed
DESCRIPTION MIN. MAX STEP UNIT
Determines the maximum 4th way speed 20 56 2 Hz
Minimum setting = minimum speed
Maximum value = maximum speed
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
