4-66
92 BOOT ERROR
Condition for error detection
The alarm is signalled after switching the machine on.
The truck remains in the pre-operational status. All function are deactivated.
The logic unit does not received information from lifting or traction logic unit or both.
93 NOT REP ERROR
Condition for error detection
Not replay error.
The logic unit is waiting for information from the instrument panel
The machine remains in the preoperational status and all functions are disabled.
Check:
• Insulation of the machine
• RESET the instrument panel
• Install the latest version of the software via the PROGRAMMER
• Replace the dashboard
94 CHKSUM ERROR
Condition for error detection
Software error.
• Carry out a card RESET from the I/O card
• Install the latest version of the software via the PROGRAMMER
• Replace the logic unit.
C1 STOP OPEN
Condition for error detection
Failure on the stop lights.
Check the stop lights bulbs and the relative cables
C2 ANT_OPEN or POST_OPEN
Condition for error detection
Lighting system fault.
Check the light bulbs and the relative cables
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
