12-39
0
1
2
3
4
5
6
7
8
9
10
12
12
12
12
15
16
16
18
Installation:
Clean the housing seats with compressed air.
Manual tightening
Installation:
Lubricate the bushing with grease before inserting the
rod
[Point 5]
Installation:
Clean the housing seat with compressed air; lubricate
the o-ring with hydraulic oil before installation to facilitate
positioning
Remarks:
Check that the o-ring is correctly in its seat and is not
damaged or twisted
Installation:
Clean the housing seats with compressed air; lubricate
the gasket with hydraulic oil before installation to
facilitate positioning
https://www.forkliftpdfmanuals.com/
To Next Page
