CESAB B 215 - Page 129

3-45
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
E
SWITCHING THE TRUCK ON USING THE PIN CODE
The truck can be switched on using a 5-digit pin code by enabling the parameter PIN CODE = DISPLAY
Activating the pin code request, every time the truck is switched the display will request the pin code
insertion.
Using the parameter DY PIN ENABLE it is possible to enable from 1 to a maximum of 40 different switch
on codes.
The table below shows the 40 standard pin codes and relative associated profiles
PIN CODE table
PROFILE DESCRIPTION
It is possible to modify the performance (traction and hydraulic functions) of the truck by creating up to five
different machine profiles (0 - 1 - 2 - 3 - 4), each profile can in turn by modified in L-P-H mode
In the standard configuration the machine has all five profiles configured with the same values and when
the truck is switched on Profile 0 is loaded in P mode.
To modify the parameters of the various profiles refer to chapter 03 paragraph PARAM CHANGE
Function Description Notes
CHANGE
This function allows to modify pin code and related
profile
Code = switch on code
PR = profile associated to the
switch on code
DEFAULT
Reset all the default passwords
Reference to the
PIN CODE table
Re
f.
PIN
CODE
ASSOCI-
ATED
PROFILE
Re
f.
PIN
CODE
ASSOCI-
ATED
PROFILE
Re
f.
PIN
CODE
ASSOCI-
ATED
PROFILE
Re
f.
PIN
CODE
ASSOCI-
ATED
PROFILE
1 00323 0 11 11404 0 21 22433 0 31 34132 0
2 01034 1 12 12403 1 22 23013 1 32 34343 1
3 02021 2 13 13042 2 23 23401 2 33 40010 2
4 02102 3 14 14143 3 24 24431 3 34 40143 3
5 03033 4 15 14021 4 25 30001 4 35 41342 4
6 03421 0 16 14322 0 26 30204 0 36 41414 0
7 04031 1 17 20102 1 27 32040 1 37 42231 1
8 04432 2 18 21020 2 28 33300 2 38 43001 2
9 10043 3 19 22010 3 29 33410 3 39 43203 3
10
11020 4 20 22344 4 30 34010 4 40 44044 4
00323 0
PSW CHANGE
CODE PR
https://www.forkliftpdfmanuals.com/