122
OPERATING YOUR VEHICLE
Operating Your Vehicle
Break-in Period
The break-in period for this vehicle is the first 1000km� Maintain the vehicle according to the break-in
period requirements�
The following items should be observed during break-in period:
1� Do not run at high engine speeds immediately when the engien is just started� Allow the engine to warm
for 2 ~ 3 minutes at idle speed and let oil ow into all the engine lubricating parts.
2� Do not run the engine at high RPM when the transmission is in neutral�
3� Avoid driving on full throttle�
Do not exceed specied rpm during break-in.
Requirement
MAX rpm
Initial mileage: 1000km 6500 rpm
After initial mileage: 1000km 9800 rpm
DANGER
New tires are slippery, which could cause a loss of control and cause damage� Tire pressures should
be at the specified value during the 1000km break-in period� Avoid sudden and maximum braking/
acceleration and hard cornering during the break-in period�
To Next Page
Loading...
