CF MOTO 800MT - Gear Shift Lever

46
CONTROLS & FEATURES
Gear Shift Lever
The gear shift lever
2
is on the left side of the engine�
Quick Gear Shifting
(If equ
ipped)
This vehicle is equipped with quick gear shifting function� When
quick gear shifting function is activated, the gear position can be
shifted without operating the clutch lever, and the throttle does
not need to be disengaged� The transmission can be upshifted
continuously and uninterrupted�
Quick gear shifting function estimates execution of shifting
operation according to the shift gear shaft position, and sends a
signal to the engine control system to unload the transmission
gears briefly through manipulation of the engine's EFI
programming�
For optimal performance during transmission upshifts, the
throttle should remain open� On transmission downshifts, the
throttle should remain closed�
If the vehicle is not equipped with quick gear shifting function,
or if the function is turned o󰀨, gear upshifts and downshifts must
be operated with the clutch lever�
6
5
4
3
2
N
1
2
Downshift RPM
6
th
gear→5
th
gear: < 9000 rpm
5
th
gear→4
th
gear: < 8750 rpm
4
th
gear→3
rd
gear: < 8500 rpm
3
rd
gear→2
nd
gear: < 8000 rpm
2
nd
gear→1
st
gear: < 7500 rpm
Upshift RPM
1
st
gear→2
nd
gear: > 2000 rpm
2
nd
gear→3
rd
gear: > 2000 rpm
3
rd
gear→4
th
gear: > 2200 rpm
4
th
gear→5
th
gear: > 2300 rpm
5
th
gear→6
th
gear: > 2400 rpm