MAINTENANCE
135
Key Points of Lubrication Schedule:
Check all components at the intervals outlined in the Periodic Maintenance Schedule� Items not listed in
the schedule should be lubricated at the general lubrication interval�
• Change lubricants more often under severe use, such as wet or dusty conditions�
• Lubricate before long periods of storage, after pressure washing, or after submerging drive system�
Item Lubricant Method
Engine oil
SAE 10W-50 JASO T903 MA2
(See page 152 for oil viscosity chart)
Inspect the level from the engine
oil view window�
Brake uid DOT4 or DOT5�1
Keep level between upper and
lower lines
Factory brake uid: DOT 5.1
To Next Page
Loading...
