MAINTENANCE
184
Lights
High beam, low beam and fog lights are adjustable� Rotate the light adjusting knob
1
to adjust the light�
CAUTION
Adjustment of high / low beams should be accordance with local regulations� The beam height standard is
based on the front and rear wheels on level ground with the driver seated on the vehicle�
All lights are an LED structure, which cannot be repaired if damaged or failed� Have your dealer replace
the entire assembly if an LED is damaged or has failed�
CAUTION
Do not leave the power turned on for a long time if engine will not be started� Leaving lights constantly on
will use battery capacity and could cause the engine to fail to start�
1
1
To Next Page
