126
OPERATING YOUR VEHICLE
Starting O
Pull in the clutch lever, shift into a gear, then release the clutch lever slowly and at the same time apply the
throttle gently�
Shifting, Riding
Shifting Gears Without Quick Gear Shifting:
Pull in the clutch lever and release the throttle�
Shift to the next gear with the gear shift lever�
Release the clutch lever and slowly open the throttle
at the same time to nish shifting the gear.
Hold the handle bar and drive with throttle applied�
Shifting Gears With Quick Gear Shifting:
Open the throttle gently and upshift the gearshift
pedal as necessary�
Release the throttle and downshift the gearshift
pedal as necessary�
Hold the handlebar and drive with throttle applied�
WARNING
Avoid any abrupt load alterations or strong brake operation, which can cause an out of control vehicle�
Adjust the speed according to road conditions and situation around you�
When the engine RPM is high, do not shift into lower gears� Release the throttle first and reduce the
engine speed�
All adjustments for vehicle operation should be made when vehicle is at a standstill�
The passenger must be seated properly on the passenger seat with feet on the rear foot pegs, wearing a
helmet and other safety protection, and holding onto the operator or grab handle�
To Next Page
Loading...
