CF MOTO 800MT - Engine Assy; Engine Oil Level Inspection

MAINTENANCE
150
Engine Assy
For the engine, transmission, and clutch to work properly, maintain the engine oil between the upper and
lower lines on the oil window� During the engine lubrication process, oil not only builds up carbon by-
product and metallic impurities, but may also consume itself by a small amount�
Inspect and change the oil in accordance with the Periodic Maintenance Chart�
DANGER
Motorcycle with insu󰀩cient, deteriorated or highly contaminated engine oil will cause accelerated wear
and may result in engine or transmission seizure, accident, and injury�
Engine Oil Level Inspection
Make sure the vehicle is turned o󰀨.
If the engine was operated prior to turning o󰀨, please wait for 2
to 3 minutes for the oil to settle�
Support the vehicle vertically on a level surface, then view the
oil level inspection window:
If the oil level is located at area A, drain out oil until the level is
within area B�
If the oil level is within area B, it is at the proper level�
If the oil level is located at area C, or no oil level is viewed, ll
the engine with the recommended oil until the level is within
area B�
A
B
C