CF MOTO 800MT - Page 202

CLEANING & STORAGE
202
Insu󰀩cient
power
Valve and piston
Intake and exhaust valves, piston excessive carbon
deposits: poor fuel quality and poor oil quality
Repair or
replace
Clutch Clutch slips: poor oil, too long time use and overloaded Adjust or replace
Cylinder and
ring
Cylinder, piston rings wear: poor oil quality and too
long time use�
Replace oil
Brake Incomplete separation of brake: the brake is too tight Adjust
Main chain The drive chain is too tight: improper adjustment Adjust
Engine
Engine overheats: too rich or too lean mixture, poor
oil, fuel quality, shelter, etc
Adjust or replace
Insu󰀩cient
power
Spark plug
Improper spark plug gap, normal specification is
0�8mm -0�9mm
Adjust or replace
Intake pipe Air leakage of intake pipe: too long time use Adjust or replace
Cylinder head Air leakage for cylinder head or valves Adjust or replace
Electric system Electrical system failure Inspect or repair
Air lter Clogged air lter Replace
Headlights and
tail lights do not
work
Cable Poor connections Adjust
Left and right
switches
Switch poor contact or damage, blown fuse Adjust or replace
Headlight Bulb and lamp holder failure or damage, blown fuse Adjust or replace
Regulator
Inspection� Loose connection or burnt Inspect or
replace
Magneto
Inspect the coil: poor connection or burnt Inspect or
replace