EasyManua.ls Logo

CFE CFE-5100 - Feature; Guidance for Disconnection of Batteries During Shipment

CFE CFE-5100
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-7-
Optimized self-consumption will be
achieved. ESS is used to store the excess
energy produced by PV system.
Extra energy will be fed into the grid when
ESS is fully charged, and the system has
already met its self-consumption
requirement.
Evening
Night
ESS will power the AC load when the
sun sets.
If the ESS capacity is insufficient to meet
self-consumption requirement, electricity
will be obtained from the grid.
2.6 Feature
The Product has the following features:
Energy storage unit: This battery is suitable for PV solar system compatibility.
Battery management system (BMS): The battery’s built-in BMS monitors and
prevents the battery from running outside of the design limitations. See
Troubleshooting on Chapter 8.
Monitor: The battery’s BMS is built-in with a Wi-Fi module, and the battery
running information could be seeing in mobile phone.
Easy firmware update: The BMS firmware can be updated to the latest version.
See Chapter 9 Firmware Update.
Expandability: The battery capacity can be increased by adding another
battery. See Part 5.4 Cable Connections.
3 Guidance for Disconnection of Batteries during Shipment
1) Cartons that have been crushed, punctured, or torn in such a way that contents
are revealed, shall be set aside in an isolated area and inspected by a skilled
person, promptly collected, segregated, and either the consignor or consignee
contacted.

Other manuals for CFE CFE-5100

Related product manuals