-8-
2) The DC circuit of the Product has to be disconnected before outgoing.
3) A precautionary label has been affixed to the shipping carton to alert individuals
as to the battery within the package has been disconnected; otherwise, the battery
should not be transported.
4) We have conducted comprehensive tests to ensure the equipment they distribute
around the world is safe for shipping transport. These products shall be handled
with care and immediately inspected if visibly damaged. lf the carton is visibly
damaged, please contact the CFE customer careline to confirm whether the
battery could be used safely or not.
4 Installation Prerequisites
4.1 Installation Location
Make sure that the installation location meets the following conditions:
✓ Building designed to withstand earthquakes.
✓ At distance from the sea to avoid salt water and humidity.
✓ Flat and level floor or service.
✓ No flammable or explosive materials nearby.
✓ Optimal ambient temperature between 15°C and 30°C.
✓ Temperature and humidity at a constant level.
✓ Minimal dust and dirt in the area.
✓ No corrosive gases present, including ammonia and acid vapor.
✓ The Product is rated at IP20, so the battery could be installed indoors.
If the ambient temperature is outside the operating range, battery will protect
itself by shutting down. The Product’s optimal operating temperature is 15°C to
30°C. Frequent exposure to severe operating conditions would adversely affect
the performance and lifetime of the battery.
To Next Page
Loading...
