Chamberlain 5410E 2013 User Manual

Owner’s Manual
■ Please read this manual and the enclosed safety materials carefully!
■ Fasten the manual near the garage door after installation.
■ Periodic checks of the opener are required to ensure safe operation.
■ The model number label is located on the front panel of your opener.
GARAGE DOOR OPENER
Model 5410E – EDITION 2013
For Residential Use Only

Chamberlain 5410E 2013 Specifications

General

Brand	Chamberlain
Model	5410E 2013
Category	Garage Door Opener
Language	English

Summary

Introduction

Safety Symbol and Signal Word Review

Explains the meaning of safety symbols and signal words used in the manual.

Preparing Your Garage Door

Tools Needed

Lists the necessary tools for assembly and installation of the opener.

Planning

Sectional Door Installations

Specific considerations for installing openers on sectional garage doors.

One-Piece Door Installations

Specific considerations for installing openers on one-piece garage doors.

Carton Inventory

Hardware Inventory

Assembly Step 1: Assemble T-Rail and Attach Chain Sprocket Bracket

Assembly Step 2: Install Trolley on T-Rail

Assembly Step 3: Fasten T-Rail to Motor Unit

Assembly Step 4: Install the Chain

Assembly Step 5: Tighten the Chain

Installation

Important Installation Instructions

Critical safety and installation guidelines to follow before starting the installation process.

Installation Step 1: Determine Header Bracket Location

Sectional Door and One-Piece Door with Track

Specific instructions for locating the header bracket for sectional and tracked one-piece doors.

One-Piece Door Without Track

Specific instructions for locating the header bracket for one-piece doors without a track.

Installation Step 2: Install the Header Bracket

Wall Header Bracket Installation

Detailed steps for mounting the header bracket on the wall.

Ceiling Header Bracket Installation

Detailed steps for mounting the header bracket on the ceiling.

Installation Step 3: Attach T-Rail to Header Bracket

Installation Step 4: Position the Opener

Sectional Door or One-Piece Door with Track

Positioning instructions for sectional and tracked one-piece doors.

One-Piece Door Without Track

Positioning instructions for one-piece doors without a track.

Installation Step 5: Hang the Opener

Installation Step 6: Install the Door Control

Wiring Instructions for Accessories

Specific wiring connections for additional accessories like The Protector System®.

Installation Step 7: Install the Light

Installation Step 8: Attach Emergency Release Rope and Handle

Installation Step 9: Electrical Requirements

Installation Step 10: Fasten the Door Bracket

Sectional Doors

Specific instructions for fastening the door bracket on sectional doors.

One-Piece Doors

Specific instructions for fastening the door bracket on one-piece doors.

Installation Step 11: Connect Door Arm to Trolley

Sectional Doors Only

Specific instructions for connecting the door arm to the trolley for sectional doors.

All One-Piece Doors

Specific instructions for connecting the door arm to the trolley for one-piece doors.

Travel Limit Adjustment Procedures

Adjusting the opener's upward and downward travel limits for proper door operation.

Adjustment Step 1: Adjust the Travel Limits

Adjustment Step 2: Adjust the Force

Adjustment Step 3: Test the Safety Reversal System

Install the Protector System®

Instructions for installing the optional Protector System® accessory for enhanced safety.

Install Wired Door Controls (Optional Accessory)

Programming the Remote Control

ACCESSORIES

SPECIFICATIONS

OPERATION

Maintenance Schedule

Outlines a schedule for routine maintenance tasks for the opener.

Troubleshooting

Motor Unit Assembly Parts

Limited Warranty on Motor